Eicon Networks DIVAMobile V90 Especificaciones Pagina 60
- Pagina / 74
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
AT Commands and Result Codes
◆
◆◆
◆
60
AT &T<n> Diagnostic test control - Selects the test mode.
n=0: Terminates any test in progress.
n=1: Initiates Local Analog Loopback test.
n=3: Initiates Local Digital Loopback test.
n=4: Grants all requests for a Remote Digital Loopback test.
n=5: Denies all requests for a Remote Digital Loopback test.
n=6: Initiates Remote Digital Loopback test.
n=7: Initiates Remote Digital Loopback Self-test.
n=8: Initiates Local Analog Loopback Self-test.
n=5
AT &V Reports the current configuration, the stored (user) profiles, and the first four stored
telephone numbers.
—
AT &W<n> Stores the current configuration profile in the modem’s non-volatile memory.
n=0: Stores the current configuration profile as profile 0.
n=1: Stores the current configuration profile as profile 1.
—
AT &Y<n> Selects the default user profile.
n=0: Selects profile 0 as the default user profile.
n=1: Selects profile 1 as the default user profile.
n=0
AT &Z<n>=<x> Stores telephone number x to location n. x can have up to 34 characters. n=1
AT %E<n> Controls line-quality monitor and auto-retrain.
n=0: Disables line-quality monitor and auto-retrain.
n=1: Enables line-quality monitor and auto-retrain.
n=2: Enables line-quality monitor and fallback/fall forward.
n=2
AT %L Returns the received line-signal level. —
AT %Q Returns the line-signal quality. —
AT \K<n> Controls how the modem interprets and transmits BREAK instructions, as follows:
From Remote - From DTE(Reliable Mode) - From DTE(Normal Mode)
n=0: Now/Dump - Command - Break/Command
n=1: Now/Dump - Now/Dump - Send
n=2: Now/Save - Command - Break/Command
n=3: Now/Save - Now/Save - Send
n=4: Data/Break - Command - Break/Command
n=5: Data/Break - Data/Break - Send
n=5
AT \N<n> Selects the error-correction mode.
n=0: Normal mode (includes speed buffering).
n=1: Direct mode (without speed buffering).
n=2: V.42 reliable mode with fallback to MNP - V.42 or MNP only.
n=3: Autoreliable mode - V.42, MNP or normal.
n=4: V.42 reliable mode - V.42 only.
n=5: MNP reliable mode - MNP only.
n=3
Command Function Default
- Diva Mobile V.90 PC Card 1
- Reference Guide 1
- Contents 3
- Page 4 4
- About This Guide 5
- Technical Specifications 7
- V.90 Modem Fax Features 8
- Special Features 8
- Typical Power Requirements 8
- Environmental Requirements 8
- Configure the connection 10
- To specify your location 13
- Configuring Diva Mobile 14
- To connect to the Internet: 16
- To disconnect: 17
- Click to view the log file 18
- Click ‘Next’ 21
- For: Select: 21
- CHAPTER 6 26
- If you are not 28
- Complete the installation 34
- Specify your location 35
- Using the Line Monitor 40
- Launching Diva Assistant 40
- Using Analogue Applications 41
- UltraPort 42
- technology 42
- Sending and Receiving Faxes 43
- To set up a cover page 44
- Receiving faxes 45
- Travelling to a New Location 46
- Under Windows 2000/XP 47
- Under Windows NT 47
- Troubleshooting 49
- Internet over ISDN 53
- Diagnosing problems 54
- Using the Line Check utility 54
- Using DiTrace 54
- Removing Diva Mobile 55
- Customer Services 56
- AT Commands and Result Codes 57
- Error correction commands 62
- Caller ID commands 62
- S-Register summary 63
- Result codes 65
- APPENDIX B 68
- FCC Part 15 Notice 69
- ISDN Interface 70
- If Problems Arise 70
- Installation 70
- Canadian Modem Requirements 71
- EU Declaration of Conformity 72
- Republic of Germany 73
Relacionado con productos y manuales para Los Dispositivos De Acceso Rdsi Eicon Networks DIVAMobile V90
(16 paginas)Cables Direct UT-151 manuels
Manuels d'utilisation et guides de l'utilisateur pour Interface de câble/adaptateurs de genre Cables Direct UT-151.
Nous fournissons des manuels en pdf 1 Cables Direct UT-151 à télécharger gratuitement par type de document : Fiche technique
Comentarios a estos manuales