Eicon Networks ISDN NT1 Especificaciones descargar pdf (Pagina 5)

Introduction 5

Introduction

The S9x family of Eiconcards are PCI Plug-and-Play (PnP) cards

that offer X.25 connectivity through one or two (depending on the

the Eiconcard model)very high-speed ports (supporting V.24, V.35,

EIA-530, V.36/RS-449, or X.21 interfaces) at speeds of up to 2

Mbps, and/or through an ISDN BRI port (Eiconcard S91) at speeds

of up to 128 kbps (over the “D” channel or the “B” channels).

Note

The Eiconcard S9x also supports protocols such as SDLC,

PPP, and Frame Relay.

All Eiconcards have been tested and found to comply with

the Electromagnetic compatibility, Safety and Network

connection regulations within the European Union, North

America, and other major territories. Read the regulatory

information on page 33 before installing and using your

adapter.

Hardware Features

The Eiconcard S9x features the following:

The Very High-Speed Interface (VHSI) ports, support full duplex

communications over a V.24, V.35, EIA-530, V.36/RS-449, or X.21

interface at speeds of up to 2 Mbps per port (depending on the type

of interface selected).

The ISDN BRI port supports transfer rates of up to 128 kbps (over

the “D” channel or the “B” channels).

Ease of Use

The VHSI port features automatic interface selection. The intelligent

controller on the Eiconcard S9x detects the type of cable connected

to the port and automatically selects the matching interface.

Eiconcard CPU/Memory/Flash # of VHSI Ports #of ISDN BRI Ports

Eiconcard S90 25 MHz Motorola 68302 /

1 MB RAM / 1 MB Flash

1N/A

Eiconcard S91 25 MHz Motorola 68302 /

1 MB RAM / 1 MB Flash

Eiconcard S92 33 MHz Motorola 68360 /

1 MB RAM / 1 MB FLASH

2N/A

Eiconcard S94 33 MHz Motorola 68360 /

8 MB RAM / 1 MB FLASH

2N/A

1 2 3 4 5 6 7 8 9 10 ... 39 40

Sin comentarios

Eicon Networks ISDN NT1 Especificaciones Pagina 5