Eicon Networks S52 Manual de servicio descargar pdf (Pagina 42)

SNMP Support For A Dialogic® Diva® Media Board

page 42

6. Under Traps destinations, click Add, enter the name or IP address of the host computer, and click Add.

7. The host name is added to the list of Trap destinations.

8. Click OK to close the dialog box.

9. Restart the SNMP service. To do so, right-click SNMP Service in the Services window and select Restart

from the list.

10. Close the Services window.

To verify the function of the SNMP service

1. Click Start > Run and type cmd to open a DOS box.

2. In the DOS box type: snmpwalk -v 2c -c public localhost interface | find_"Diva"

The result should be similar to the following, which is for a Dialogic

Diva

V-4PRI Media Board:

IF-MIB::ifDescr.101 = STRING: Dialogic_Diva_V-4PRI/E1/T1_1030

IF-MIB::ifDescr.133 = STRING: Dialogic_Diva_V-4PRI/E1/T1_1030

IF-MIB::ifDescr.164 = STRING: Dialogic_Diva_V-4PRI/E1/T1_1030

IF-MIB::ifDescr.195 = STRING: Dialogic_Diva_V-4PRI/E1/T1_1030

3. In the DOS box type: snmptrapd -f -L o

The result should be similar to the following:

2006-01-28 11:14:35 NET-SNMP version 5.2.1.2 Started.

You can create an output of traps if you change the status of the layer 1/2, for instance by disconnecting

the cable from the Diva Media Board. The result after changing the status of layer 1/2 should be similar to

the following:

2006-01-28 11:16:25 localhost [127.0.0.1] (via UDP: [127.0.0.1]:1053) TRAP, SNMP v1, community public

SNMPv2-SMI::enterprises.434.2 Link Up Trap (0) Uptime: 1:16:47.06

IF-MIB::ifIndex.101 = INTEGER: 101

SNMPv2-SMI::enterprises.434.2 Link Down Trap (0) Uptime: 1:16:48.57

IF-MIB::ifIndex.101 = INTEGER: 101

2006-01-28 11:16:26 localhost [127.0.0.1] (via UDP: [127.0.0.1]:1053) TRAP, SNMP v1, community public

SNMPv2-SMI::enterprises.434.2 Link Up Trap (0) Uptime: 1:16:48.81

IF-MIB::ifIndex.101 = INTEGER: 101

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 57 58

Sin comentarios

Eicon Networks S52 Manual de servicio Pagina 42