Eicon Networks ISDN NT1 Guía de instalación descargar pdf (Pagina 34)

ENGLISH

Installation34

Connect your Diva Server Analog-8 or V-Analog-8P adapter as follows:

Contact assignments (plugs and jacks):

Note: Looking at the RJ45, RJ10, and RJ11 connectors with the exposed

connector pins facing you, the pins are numbered from 1 to 8, 1 to 4, and 1 to 6

from left to right as shown below.

RJ45 Signals Dongle with RJ10 jacks RJ11

Pin 1 Ring

Port A

Pin 2 Pin 3

Pin 2 Tip Pin 3 Pin 4

Pin 7 Tip

Port B

Pin 3 Pin 4

Pin 8 Ring Pin 2 Pin 3

RJ45 connector RJ10 connector RJ11 connector

1. Take the four cables with the dongle and plug the

RJ45 connectors into the adapter.

Diva Server

Analog

adapter

2. Take the eight cables and plug

the RJ10 connectors into the

dongle. The jack labeled with ‘A’

corresponds to the ports 1,3,5,

and 7. The jack labeled with ‘B’

corresponds to the ports 2,4,6,

and 8.

3. Plug the RJ11 connectors

into the wall jack or PBX.

Wall jack or PBX

VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 127 128

Sin comentarios

Eicon Networks ISDN NT1 Guía de instalación Pagina 34