Eicon Networks CX1 Manual de instalación descargar pdf (Pagina 71)

G&R

DSA Configuration

Step-By-Step Guide

Configuration check list

Before you start to configure the mainframe and Host Links system you must

obtain the configuration parameters you will need. If you already have a

functional network, you do not need to change the configuration of the main-

frame. Obtain the parameters from the network administrator.

The mainframe system

You will need:

• The DSA node name (SCID, session control ID) of the system

If DSA session is to be used for DSA200 connections:

• The DSA area address of the host (the TSN, e.g. 01:24)

• The network address of your mainframe system:

If connecting over a TCP/IP network (RFC1006)

• The IP address of the RFC1006 port on the FEP or mainframe

If connecting over a LAN network:

To a front-end:

• The MAC address of the LAN adapter of the FEP

Direct to the mainframe (ISL, FCP, GNSP, Diane):

• The MAC address of the mainframe adapter

If connecting over a private- or public X25 link:

• The X25 address of the FEP to be used

Gline Line Handlers and Configuration

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 132 133

Sin comentarios

Eicon Networks CX1 Manual de instalación Pagina 71