Eicon Networks C31 Especificaciones descargar pdf (Pagina 6)

6 Installing the Eiconcard C3x

Installing the Eiconcard C3x

To install the Eiconcard C3x in your PC, you must insert it into the

PC’s PCMCIA slot, and then connect the appropriate cable.

1 Install the Eiconcard C3x

Insert the Eiconcard C3x into the PC’s PCMCIA slot as shown in

Figure 1. To connect the cable to the card, position it with the

embossed arrows on the cable connector facing up. Push it straight

into the port on the card, and push the locking tab on the cable

connector toward the PC.

Figure 1. Installing the Eiconcard C3x and Cable

Because all the cables available for the Eiconcard C3x connect to

the card in the same way, these instructions apply regardless of

whether you will be making V.24 connections or ISDN connections

(Eiconcard C31 only).

2 Configure Protocol Parameters

Before you can establish connections with the Eiconcard C3x, you

must use the configuration utilities provided with your

communications software to configure protocol-related parameters.

The documentation included with your communications software

describes how to configure protocol parameters and establish

connections with the Eiconcard C3x.

3 Test the Eiconcard C3x

The application software you purchased with the Eiconcard C3x

contains a test program to verify the integrity of the card. Consult

the documentation supplied with this software for complete

instructions.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Sin comentarios

Eicon Networks C31 Especificaciones Pagina 6