Eicon Networks DIVA T/A ISDN Modem Guía de usuario descargar pdf (Pagina 10)

DIVA T/A ISDN Modem User’s Guide 10

Figure 1: Connecting the Cables

➀ ISDN cable ➃ Serial cable

➁ Analog device #1 ➄ A/C adapter

➂ Analog device #2 ⑥ Phone Adapter

Note:

Phone ports and adapters are only available on certain

models.

After Connecting the Cables

After connecting the power and the ISDN cable to the DIVA T/A,

wait at least 10 seconds for the DIVA T/A to initialize and then check

the “D” and “LINK” LEDs. If they are both glowing steadily, then

your DIVA T/A is operational (either from a previous configuration

or because your line supports AutoSPID). Go to the section “What’s

Next?” on page 12 and continue.

Note:

Where AutoSPID is supported, the DIVA T/A installation

is totally Plug and Play.

If the “LINK” LED is not glowing steadily, this indicates a problem

with the ISDN line. Recheck all your cable connections.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 121 122

Sin comentarios

Eicon Networks DIVA T/A ISDN Modem Guía de usuario Pagina 10