Eicon Networks DIVA T/A ISDN Modem Guía de usuario descargar pdf (Pagina 36)

DIVA T/A ISDN Modem User’s Guide 36

4 From the Protocol tab, select the ISDN connection protocol that

you want to use (it must match the protocol on the receiving

system). Follow the guidelines below.

Note:

the sample above depicts the International version of the

DIVA T/A Configuration Tool. If you’re using the North American

version the V.110 option is not accessible.

Note:

the Enable Always On / Dynamic ISDN (AO/DI) option is only

available if the firmware you are using supports it and you have

subscribed to it with your ISDN Service Provider.

Protocol Guidelines:

•

For most connections, Multilink PPP is used (PPP is the

default for International Firmware). If it is not supported, use

PPP (for single B-channel connections), V.120, or V.110

(International Firmware only).

•

Both PPP and Multilink PPP require that a PPP

communications stack be installed on your computer (for

example, Dial-Up Networking).

Notes:

•

To obtain maximum Multilink PPP performance, you need a

PC equipped with a UART 16650 (you might need to install a

fast com port card), which supports COM port speed of 230.4

kbps (versus 115.2 kbps with 16550).

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 121 122

Sin comentarios

Eicon Networks DIVA T/A ISDN Modem Guía de usuario Pagina 36