Eicon Networks DIVA T/A ISDN Modem Guía de usuario Pagina 123

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 191
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 122
Chapter Nine: Advanced Installations IP filters
123
DNS: Domain name system. Filtering DNS datagrams can cause disruptions in the ability to access
remote sites.
The following options are also available: NFS/RPC, News, Time (NTP), BOOTP, SNMP, ICMP, Ping
(ICMP), Ping Reply, ICMP Redir. For a description of these protocols, consult the appropriate RFC at the
site www.faqs.org.
8.
Activate the filter by clicking the box that appears to the right of the EDIT button.
9.
Click Save. This makes the filter operational.
Note
Unlike other configurations settings, you do not have to reset the DIVA LAN ISDN Modem to make
filters operational.
IP filtering examples
The examples in this section illustrate how to use filters to:
Dropping incoming traffic from a specific network
Allowing incoming traffic only from a specific network
Blocking web surfing
Note
These examples assume that you have not enabled remote management. If enabled, the default filter
stack you see will only contain the single filter: Forward all datagrams being sent from anywhere that contain
any protocol. If no filters are present, the only visible filter will be "Drop All". The "Forward all" filter is
active but invisible.
Dropping incoming traffic from a specific network
This example defines a filter to make sure that no traffic is accepted from a specific network. Assume the
network has the IP address 213.112.12.0.
Since the filter is applied against data from the Internet, it is defined for the ISP profile. Place this filter in the
third position in the stack.
Vista de pagina 122
1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 190 191

Comentarios a estos manuales

Sin comentarios