Eicon Networks DIVA T/A ISDN Modem Guía de usuario Pagina 92

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 191
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 91
Chapter Seven: Setting up the Phone Ports Supplementary services
92
Drop a party while conference is active
During the Three-party Conference Call, you can press R,1 to disconnect the last-connected party and continue
talking to the remaining party.
Splitting and reconnecting the calling parties
During the Three-party Conference Call, you can press R,2 to place the last connected party on hold and talk
exclusively with the first-connected party.
At this point you can press R,1 to disconnect the current call and switch to the call on hold; R,2 to switch
between the two calls; or R,3 to re-establish the conference call (see Call Hold on page 87).
Terminal Portability
Terminal Portability allows you to transfer an active analog call from the DIVA LAN ISDN Modem to another
ISDN terminal (an ISDN phone, for example) that shares the ISDN link with the DIVA LAN ISDN Modem.
Both the DIVA LAN ISDN Modem and the other device must be using the same BRI.
To transfer the active call to a separate ISDN device
1.
Press R.
2.
Press *79#. If you hear a dial tone, the call has been transferred successfully. You can hang up the phone.
Note
If the transfer fails, you are reconnected to the active call.
To resume a call
1.
Lift the receiver of the phone with which you want to resume the call.
2.
Press *79#. The call is resumed.
Using call identity
You can use call identity numbers to identify transferred calls. This works as follows:
To transfer the active call to a separate ISDN device using call identity
1.
Press R.
2.
Press *79*num#. Replace num with a one, two, or three digit number. If you hear a dial tone, the call has
been transferred successfully. You can hang up the phone.
Note
If the transfer fails, you are reconnected to the active call.
To resume a call using call identity
1.
Lift the receiver of the phone with which you want to resume the call.
2.
Press *79*num#. Replace num with the one, two or three digit number that was used when the call was
transferred. The call is resumed.
Vista de pagina 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 190 191

Comentarios a estos manuales

Sin comentarios