search

Eicon Networks DIVA T/A ISDN Modem Guía de usuario Pagina 91

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 191
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 90
Chapter Seven: Setting up the Phone Ports Supplementary services
91
Malicious Caller Identification
Malicious Caller Identification allows you to register a calling number with your ISDN service provider. This
feature requires that Call Hold be supported by your ISDN line.
To invoke Malicious Caller Identification
1.
While you are on a call, or up to 30 seconds after the malicious caller has hung up, press R, then wait for
a dial-tone.
2.
Press *39#.
3.
If you were on a call, you are automatically reconnected.
Call redirection between analog ports
If two analog devices are connected to your DIVA LAN ISDN Modem, you can transfer a call from the device
on one port to the device on the other. For example, you can transfer a call from the phone on port PHONE 1 to
the phone on port PHONE 2. (This is also referred to as “internal transfer.”) To receive the transferred call, the
second device must be on hook and not ringing.
This feature requires call hold to be supported by your ISDN service.
To transfer a call to the other analog port
1.
Press R. The current call is put on hold (you will hear a dial tone).
2.
Press ‘*’, then hang up. The call is transferred to the other phone port and the phone connected to this port
rings.
3.
When the second analog device answers, the transfer is complete.
To transfer the current call with a call on hold
To make the following directions easier to follow, the current call is designated as call 1 and the call on hold is
designated as call 2.
1.
Press R. Call 1 is put on hold (you will hear the dial tone)
2.
Press *. Call 1 is transferred to the other phone port and the device connected to this port rings. You are
automatically connected to call 2.
3.
When the second device answers, the transfer is complete. Note that you cannot retrieve call 1 without
disconnecting call 2.
Other options
To cancel the transfer, lift the receiver of the initiating device and press *R. The call is then re-established with
the first device.
If the second device can not accept the redirected call (it is busy or ringing), the device initiating the transfer
will ring. The call can then be answered and communication re-established.
If the second device does not answer within 30 seconds (90 seconds in Denmark and Sweden), the call is
cleared. Note that communication charges may apply while the transferred call is ringing (see “Call Hold” on
page 87).
Three-party Conference Call
This feature lets you speak with up to two people at the same time. Once a Three-party Conference Call is set
up, you may drop a call and continue with the other caller, or you put the one caller on hold while staying
connected to the other caller.
Setting up a Three-party Conference Call
1.
Dial the first number.
2.
When the call connects, press R.
3.
Dial the second number.
4.
When the call connects, press R.
5.
Press 3 to start the conference call.
Vista de pagina 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 190 191

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para Redes Eicon Networks DIVA T/A ISDN Modem
Redes Eicon Networks Eicon 1550 Especificaciones   (8 paginas)
Redes Eicon Networks 800-241 Guía de usuario   (52 paginas)
Redes Eicon Networks 1530 Guía de usuario   (162 paginas)
  • Star Trac Qbex Autolux VuQube Promowide
  • Sony Estaciones de muelle de dispositivos móviles Insignia Auriculares Husqvarna Cortadoras De Césped SkyLink Cubos de interfaz Braun Fabricantes De Jugos
  • Panasonic DMRBWT850EC LG 32LC2R Asus CS-B
  • LG FX166 Manual de usuario Electrolux KTI6500BE Manual de usuario Memorex MI3X-BLK Ficha de datos Channel Master CM-3000HD Guía de usuario Philips HTB3550G Manual de usuario