Eicon Networks ISDN NT1 Guía de instalación descargar pdf (Pagina 46)

International regulatory information

page 46

Regulatory information for Australia

WARNING

This customer equipment is to be installed and maintained by service

personnel as defined by AS/NZS 3260 Clause 1.2.14.3 Service Personnel.

It may be hazardous if your computer is not properly plugged in and

grounded.

IMPORTANT

This equipment will be inoperable when mains power fails.

• This customer equipment shall only be installed in a PC that requires the use of

a tool to gain access to internal parts (e.g. this customer equipment must not

be installed in a PC with a ‘flip lid’).

• Proper installation of the Eiconcard requires that it is screwed to the metal

backplate of the computer. This ensures proper grounding, which is necessary

for safety purposes.

• This customer equipment may only be installed in host equipment where there

is at least 2 mm of air gap between the customer equipment and adjacent boards

(PCBs).

• Only compliant line cord set(s) shall be used as replacements with this customer

equipment.

64-0308-09.fm Page 46 Monday, March 15, 2010 3:32 PM

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 52

Sin comentarios

Eicon Networks ISDN NT1 Guía de instalación Pagina 46