Eicon Networks CX1 Especificaciones descargar pdf (Pagina 162)

Across the Boards



Communications Device Drivers

Section 6 - MAINCON Driver Configuration

Page 312

cfSOFTWARE Confidential,



2000

6.24 MAINCON Panel E4, Telnet VT320 (continued)

4. Half-Duplex

Setting this field to ‘1’ will cause the VT220 emulator to operate in half-duplex mode. Half-duplex mode is

significantly inferior to full-duplex mode for terminal emulation and data transfer. Full-duplex mode should

be used where ever possible.

5. Trace Size in K bytes

Defines the size of the allocated trace buffer in KB. If zero, the trace is disabled. Otherwise, the trace size

can be specified up 1000K bytes (the exact size limit is environment specific, and the trace size will be

adjusted down as needed).

6. Destination Port Number

Port number of Telnet server to connect to. The Well-Known-Port for Telnet (#23) is the default.

7. ASCII or Binary

Specify (1) if Telnet should negotiate Binary mode with host. Zero (0) is correct in most cases.

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 231 232

Sin comentarios

Eicon Networks CX1 Especificaciones Pagina 162