Eicon Networks CX1 Especificaciones Pagina 191

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 232
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 190
Across the Boards
Communications Device Drivers
Section 6 - MAINCON Driver Configuration
Page 341
cfSOFTWARE Confidential,
2000
6.33 MAINCON Panel G2
WinCPIC LU6.2
Configuration filename: MAINCFG.WC6
Used by cf Device Driver:
#
Name Description
99 CFX62WC WinCPIC LU6.2 (Win16)
130 CFX62WC3 WinCPIC LU6.2 (Win32)
__________________
ACROSS-THE-BOARDS(r) Config
__________________
----------- WinCPIC LU6.2 -------------
Trace size in K bytes......... 0000
Connect timeout (seconds)..... 0000
Default configuration key..... CONFIG #1
Configuration Records:
Key Description
--- ----------------------------------------
CONFIG #1 Sample Configuration #1
ALT 2 Alternate Configuration
Enter a non-zero value (4-1000) to enable a diagnostic trace of
the LU6.2 session.
PgDn: Next Page PgUp: Prior Page F10: Write config to disk Esc: Exit
1. Trace Size in K bytes
Defines the size of the allocated trace buffer in KB. If zero, the trace is disabled. Otherwise, the trace size
can be specified up 63K bytes.
2. Connect Timeout
Defines the time that the driver will wait for the host application to respond to the connect request.
The WinCPIC LU6.2 configuration panels allow for the definition of up to eight configurations for connecting
to the host. Each configuration has a Key which is used by the application to select which configuration
record to use. Also, one of the configurations is marked as the default, which is used in case the application
does not explicitly specify a key.
At least one configuration record must be added, and one of the configuration records must be marked as a
default.
To add a new configuration record, tab to the configuration record list and press F2 -- the configuration panel
will be displayed. Enter a key and any other required data, then press F10.
To delete a configuration record, tab to that configuration record and press F3.
Vista de pagina 190
1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 231 232

Comentarios a estos manuales

Sin comentarios