Eicon Networks S93 Guía de instalación descargar pdf (Pagina 17)

Basic drivers 17

3. In the ‘Select OEM Option’ dialog box, select the Diva Server adapter installed in the

computer.

•‘Eicon detect and install all adapters’: The Diva Server for Windows NT software

will be installed for all Diva Server adapters installed in the computer.

•‘Eicon Diva Server ...’: The Diva Server for Windows NT software will be installed

for the selected adapter. If multiple adapters of the same type are installed in the

computer, Diva Server for Windows NT will be installed only for the first adapter

found.

Note: To install a Diva Server BRI-2M ISA bus adapter in an EISA bus computer, it

is important that the adapter has previously been logged onto the computer with the

aid of the EISA system configuration. Additional information on this can be found in

the printed guide that came with your adapter.

Click ‘OK’.

Configuring the basic drivers

When the copy process is complete, the setup dialog box for configuring the Diva Server

adapter appears. The parameters that are to be set here depend on the type of adapter.

See Basic Settings

on page 18.

The following table shows the basic operation of the dialog box:

Control field Description

<F1> key Opens the online help for the active control element.

Help Opens the online help for an explanation of every configurable parameter.

Note: When you have installed the basic drivers, you can open the online help

from the program group ‘Eicon ISDN Tools (Common)’.

OK Terminates parameter settings and continues the installation.

Defaults Sets all parameters to their default values.

Cancel Cancels the installation.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 129 130

Sin comentarios

Eicon Networks S93 Guía de instalación Pagina 17