Eicon Networks S93 Guía de instalación descargar pdf (Pagina 84)

Changing Your Installation 84

Updating the software settings

For updates to the Eicon software, or to install additional network protocols, follow the

steps below:

1. Click ‘Start > Settings > Control Panel’. Double-click ‘Network’.

2. Click the ‘Adapter’ tab.

3. If you want to install an additional network protocol, select the Diva Server adapter

on which the protocol is to be executed. Click ‘Update’.

4. Enter the path to the update files, i.e.:

• Insert your Diva Server CD-ROM into the CD-ROM drive and enter the

corresponding path:

D:\DRIVER\WINNT\ENGLISH\ if an adapter or the WAN-Miniport driver is to be

updated,

D:\DRIVER\WINNT\ENGLISH\SOFTWARE\ if the CAPI 2.0 or the DIMAINT

maintenance driver is to be updated,

D:\DRIVER\WINNT\ENGLISH\SERVICE\ if the Port driver is to be updated.

• Or enter the path of the files on the hard disk:

C:\ISDN\ if an adapter or the WAN-Miniport driver is to be updated,

C:\ISDN\SOFTWARE\ if the CAPI 2.0 or the DIMAINT maintenance driver is to be

updated,

C:\ISDN\SERVICE\ if the Port driver is to be updated.

Click ‘OK’ to accept.

5. If no configuration is required, the software update is complete. If an adapter has been

selected, the associated configuration dialog box will appear.

6. Closing the configuration dialog box with ‘OK’ will start the software update.

If more than one component is to be updated, each component must be updated

separately.

When closing the ‘Network’ dialog box, you are prompted to restart the computer. Click

‘Ye s ’ to accept the activation of the new driver versions.

Uninstalling

It may be necessary to uninstall Eicon software if, for example, there are older Eicon ISDN

software components on the computer. To uninstall the Eicon software, use the Remove

script. The Remove script can be used to remove all Eicon ISDN software components

from the computer in one step.

1. Select ‘Start > Programs > Eicon ISDN Tools (Common) > Uninstall’.

2. In the displayed message box, click ‘Ye s ’ to confirm you want to remove the software.

3. In the displayed message box, click ‘OK’ to start uninstalling.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 129 130

Sin comentarios

Eicon Networks S93 Guía de instalación Pagina 84