Eicon Networks S93 Guía de instalación descargar pdf (Pagina 31)

WAN-Miniport driver 31

• PIAFS (China, speed detection):

The transfer rate used by your PIAFS B-channel protocol is automatically detected.

Select this option only if your incoming PIAFS calls use variable transfer rates because

speed detection might slow call establishment down.

Note: The ‘B-Channel Protocol (incoming)’ parameter applies only to incoming calls. If

you want to use PIAFS for outgoing calls, you have to indicate it as an extension to the

number to be dialed. See page 67

for further information.

No Answer Timeout

When establishing a connection, this option sets the period in seconds after which the

WAN-Miniport driver should hang up if the remote side does not answer.

Shorthold Settings

Select the ‘Shorthold Settings’ page if the shorthold mode of the WAN Miniport is required

(see Using Shorthold Mode

on page 72).

Shorthold Mode

• If the ‘Shorthold Mode’ option is set, the driver automatically breaks the ISDN

connection when the configured shorthold time has been exceeded with no

transmission of data. As soon as new data is available for transmission, the ISDN

connection is re-established.

• If the ‘Shorthold Mode’ option is set, but the ‘Shorthold Time’ is ‘0’, the driver will never

initiate a shorthold of its own accord, though shorthold requests by the remote side will

be accepted.

• If the ‘Shorthold Mode’ option is not set, the driver will not initiate a shorthold nor will

it accept shorthold requests from the remote side.

Note: The Diva Server for Windows NT shorthold functions only between Eicon ISDN

adapters. For the basic shorthold functions see also Using Shorthold Mode

on page 72.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 129 130

Sin comentarios

Eicon Networks S93 Guía de instalación Pagina 31