Eicon Networks S93 Guía de instalación descargar pdf (Pagina 25)

WAN-Miniport driver 25

WAN-Miniport driver

To install the WAN-Miniport driver, you must have a fully installed Eicon Diva Server

adapter. If the WAN-Miniport driver has already been installed, see Configuring the

WAN-Miniport driver on page 26 for more information.

The WAN Miniport is required if you want to use Windows NT Remote Access Service.

See Remote Access Service (RAS)

on page 37.

Installing the WAN-Miniport driver

Note: You must be logged on as ‘administrator’ to install Diva Server for Windows NT.

Install the WAN-Miniport driver as follows:

1. Click ‘Start > Run’.

2. Type the path to the installation file:

• Insert your Diva Server CD-ROM and enter the following path:

D:\DRIVER\WINNT\ENGLISH\SETUP.BAT

(where D: is your CD-ROM drive letter).

• Or enter the path to the installation file on the hard disk, e.g.:

C:\ISDN\SETUP.BAT

(where C: is your hard disk letter).

Click ‘OK’.

3. In the ‘Select OEM Option’ dialog box, select the ‘Eicon WAN-Miniport’.

Click ‘OK’ to accept.

After some files are copied to your hard disk, the ‘Eicon WAN-Miniport Driver Setup’

dialog box appears. See Configuring the WAN-Miniport driver

on page 26.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 129 130

Sin comentarios

Eicon Networks S93 Guía de instalación Pagina 25