Eicon Networks S93 Guía de instalación descargar pdf (Pagina 43)

Eicon Port driver 43

If multiple Diva Server adapters are installed, assign each adapter to every

communications port to which it needs access. Each port will use one B-channel on the

assigned adapter. This means for example that one Diva Server BRI-2M adapter can be

used by two ports and one Diva Server 4BRI-8M adapter can be used by eight ports.

When installing the Port driver, the ports are set up automatically according to the type

and number of currently installed adapters.

Assigning the first port

During installation of Diva Server for Windows NT, the ISDN ports are automatically

assigned to the installed serial ports starting from the first installed serial port counting

consecutively upwards.

If you want to assign other serial ports to the Port driver, select a new port, e.g. COM 9,

as ‘First port’ on the port list page of the ‘Eicon Port Driver Setup’ dialog box.

Configuring ports

The buttons ‘Add’ and ‘Delete’ can be used to add and delete ports as desired.

1. To change a port, select the port to be changed in the ‘Eicon Port Driver Setup’ dialog

box.

2. Click ‘Change’.

3. In the ‘Change Port’ dialog box, select the adapter that is to be assigned to the port.

Click ‘OK’.

4. You can also leave a port unassigned so that the port number is reserved for

subsequent configurations (see the illustration below).

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 129 130

Sin comentarios

Eicon Networks S93 Guía de instalación Pagina 43