Eicon Networks S93 Guía de instalación descargar pdf (Pagina 45)

Eicon Port driver 45

MSN

When using Euro-ISDN (E-DSS1) or any other national ISDN protocol that enables

Multiple Subscriber Numbering (MSN), different MSNs (up to 23 digits in length) may be

used to distinguish the ports. Enter the corresponding value as ‘Phone number/extension’

parameter. In general, the MSNs are assigned by the telco company and are used in the

terminal description.

When using the German ISDN protocol 1TR6, the terminal device selection digit (EAZ) is

used to distinguish the ports. The EAZ consists of only one digit. This enables up to 9

ports to be distinguished.

Note: EAZ = 0 is a global call so every call is accepted by any port. Therefore,

EAZ = 0 should be used only if no other similar devices are on the same ISDN line.

To specify the called port, the caller needs to attach the EAZ to the normal telephone

number. See the terminal description of your telecommunications system or consult the

telephone company.

Configuring phone numbers/extensions

1. Check the option ‘Advanced Parameters’ in the ‘Eicon Port Driver Setup’ dialog box.

2. Select the port to which you want to assign an MSN or EAZ.

3. Click ‘Change’.

4. Enter the corresponding phone number (MSN/EAZ) or extension in ‘Phone number’.

5. Click ‘OK’.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 129 130

Sin comentarios

Eicon Networks S93 Guía de instalación Pagina 45