Eicon Networks S93 Guía de instalación descargar pdf (Pagina 50)

AT-command set of the Eicon ISDN Port 50

AT &V [<n>] Displays the current configuration of the modem driver and the last

number that has been dialed.

n != 0: Also lists all predefined profiles.

AT \T [<n>] Inactivity Timeout - The modem driver releases the connection if there

was no data traffic for n times 10 seconds.

n = 0: Disables inactivity timeout.

n > 0: Disconnects after n * 10 seconds idle time.

AT \D [<n>] Debug Level - Specifies the kind of events that should be reported by

the driver. You can view the messages with the help of the DITRACE

application. <n> is interpreted as a bit mask as follows:

Bit 0: Error messages

Bit 1: Connection related events

Bit 2: PPP control protocol frames

Bit 3: Read / write requests directed to the Port driver

Bit 4: Function calls

Bit 5: Notifications sent by the Port driver

Bit 6: Full B-channel data trace

Bit 7: Parameters

Set the related bit to '1' for every kind of message you want to see in the

log.

Default: n = 3 (Errors and connection events)

AT +MS? Modulation Selection Query

The response to the query has the following form:

AT +MS: <mod>,<auto>,<min>,<max>,<min_rx>,<max_rx>

See ‘Modulation Selection Set’ below for explanations on the variables.

Command Description

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 129 130

Sin comentarios

Eicon Networks S93 Guía de instalación Pagina 50