Eicon Networks S93 Guía de instalación descargar pdf (Pagina 18)

Basic drivers 18

Configuration profiles

Multiple configurations may be saved if several different parameters for several

configurations are needed. There are 10 memory locations per Diva Server adapter

available for configuration profiles. The memory locations are labeled ‘Untitled Profile 1’

to ‘Untitled Profile 10’ by default. The names may be changed in the editing field as

required. The configuration may be changed with the ‘+’ and ‘–’ keys or by clicking the

corresponding icons.

Typically, there is no need to save multiple configurations for servers.

Basic Settings

1. To easily identify the installed adapter, the serial number of the adapter appears under

‘Adapter Name’. The adapter name is also used for configuring other software and by

the maintenance tools. It may be edited as desired, but a unique name must be

selected. It is recommended to leave the serial number of the adapter.

2. In ‘ISDN Protocol (Switch Type)’, set the D-channel protocol according to the ISDN

switch. The ISDN service provider can supply the required information.

3. For ‘ISDN Interface Type’, select the type of interface to which your Diva Server

adapter is connected:

Note: If you have selected the ‘RBS T1’ switch type, the ‘ISDN Interface Type’

parameter is not available.

•‘Standard’: The adapter is operated on a standard ISDN bus.

•‘Point to Point’: The adapter is operated on a point to point (or direct dialing) NT2

interface.

•‘Leased Line’: The adapter is operated on a group 2 leased line.

Most BRI adapters use the ‘Standard’ interface. PRI adapters always use the ‘Point

to Point’ interface.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 129 130

Sin comentarios

Eicon Networks S93 Guía de instalación Pagina 18